Mesa Boogie Amps Triple Crown TC-50 Head – Black / Black – 50 watt Tube Guitar Amplifier – NEW! Mesa Boogie

Mesa Boogie Amps Triple Crown TC-50 Head

3 channels! 50 watts!

EL-34 powered tube guitar amplifier!

Midi Switchable, Built-in Cab Clone DI, Reverb!

The new Triple Crown TC-50 from MESA Engineering captures the essence of Rock in a way only MESA can! This 3-channel tube guitar amplifier produces 50-watts of power from a pair of EL-34’s. This new platform features a bold set of features and new circuits unlike anything else in the Mesa/Boogie line. Sonically the TC-50 can conjure anything from bubbly, sparkling clean sounds – to amazingly tight and aggressive “Rock Crunch” – to vocal, harmonically rich high-gain. Experience a new generation of Rock Royalty – The Triple Crown TC-50!

YOUR CHOICE OF PUNCH! CHOOSE EL34, 6L6, OR 6V6 POWER

Need versatility? The TC-50 features a handy BIAS SWITCH allowing you to swap the standard EL34s with the fatter, rounder sounding 6L6. For those who want a warmer, rounder response and more easily attainable power clip, 6V6s can also be used in the EL34 setting with a direct swap over, creating a “Half-Power” scenario that exudes a more bubbly, vintage voice and creamier top end harmonic content.

LUSH REVERB, MIDI, DI WITH CAB SIMULATION AND MORE!

Triple Crown TC-50 is MIDI capable with up to 256 Programmable Presets. That alone would make this amp a fantastic value. But it’s also equipped with the CabClone D.I. – A convenient live or recording interface that doesn’t require the amp to be mic’d. A full complement of voicing options are included; CLOSED BACK, OPEN BACK and VINTAGE. A HEADPHONE out is also standard for when playing without a speaker. Lush, wet Reverb is also built-in and can be adjusted separately for each of the Triple Crown TC-50’s 3 channels.

Features of the Triple Crown TC-50 Head from Mesa Boogie Amps

• Made in Petaluma, California with the World’s Finest Materials
• All-Tube Amplifier
• 2xEL-34 Power Tubes / 6x12AX7 & 1x12AT7 Preamp Tubes
• 50-Watt Class A/B Power Amp
• Bias Select Switch for your choice of EL-34, 6V6 or 6L6 Power Tubes
• 3 Fully Independent Channels, each with 2 Modes:
• CHANNEL 1 (CLEAN) Features: Normal or Drive Modes – Independent Gain, Treble, Mid, Bass, Presence, Reverb (rear panel) & Master Controls
• CHANNEL 2 (LO GAIN) Features: Normal or Tight Modes – Independent Gain, Treble, Mid, Bass, Presence, Reverb (rear panel) & Master Controls
• CHANNEL 3 (HI GAIN) Features: Normal or Tight Modes – Independent Gain, Treble, Mid, Bass, Presence, Reverb (rear panel) & Master Controls
• Output Level Control (over all channels)
• Footswitchable Solo Level Control (over all channels)
• Footswitchable, All-Tube Spring Reverb with Independent Channel Controls (rear panel)
• Footswitchable, Fully Buffered, Tube FX Loop
• Built-In CabClone Cabinet Simulator and more featuring:
• Closed-Back, Open-Back and Vintage Voices
• Internal Amp Load & Headphone Output
• Speaker On/Off & Ground Lift Switches
• Uncompensated, +4db Direct Line Output (for external cab sims/IR, etc.)
• MIDI Switchable/Programmable via Control Change and Program Change messages
• 256 Preset Location (MIDI IN, MIDI Thru/Out, MIDI Channel & Store Switches) – Controls Channels 1, 2, 3, Reverb, FX Loop & Solo)
• All Aluminum Chassis
• 3×3, 6 Button Footswitch (Bottom Row: Channel 1, Channel 2, Channel 3 – Top Row: Reverb, FX Loop, Solo)
• Slip Cover

 Weight and Dimension for the Mesa Boogie Triple Crown 50 watt head

• Height   9 – 5/8″
• Width    22-  3/4″
• Depth   10 3/8″
• Weight  35 lbs.